Contact us +81-3-3790-8011

Pulverizer

Selection of the appropriate pulverizer or milling process depending on the physical property (size, hardness, moisture, melting point, etc.) of raw materials is important in obtaining a desired particle size and process capacity.

At NARA, we have pulverizer for any kind of raw materials, comprising of organic and inorganic materials, from large block to few micron fine particles. Please feel free to consult us.

Jiyu Mill (Mill)

Jiyu Mill (Mill)
Any kind of materials can be pulverized. A wide range of pulverization from granular to fine powder is available. Milling large quantity of material in a short process time is possible.

New Cosmomizer (COS)

New Cosmomizer (COS)
Pulverizer with built-in classification mechanism employing centrifugal force. Particles are pulverized to extreme limits of several micron meters - several 10 micron meters.

Micros (MIC)

Micros (MIC)
A ring-shaped media is employed in wet milling. Uniform distribution and fine particles milling of highly viscous slurry can be performed.

Super Clean Mill (SCM)

Super Clean Mill (SCM)
Pulverizer with GMP design, to prevent cross contamination, and excellent disassembly/cleaning, particularly suitable for pharmaceutical and food products.

Sample Mill (SAM)

Sample Mill (SAM)
Lab type pulverizer for R&D, with GMP design, which is easily disassembled/cleaned. It can be used as a sizing machine by exchanging the parts.

Super Jiyu Mill (SJM)

Super Jiyu Mill (SJM)
Impact type pulverizer designed for HACCP (Hazard Analysis and Critical Control Point). Also suitable for operation undergoing frequent grade changes.

Mill Box

Mill Box
Glove Box mounted with GMP design pulverizer, for milling highly active pharmaceutical products.

Cosmo Box

Cosmo Box
Glove Box mounted with pulverizer having a built-in classification mechanism. Exhaust amount is extremely low in comparison with a conventional jet mill.

Hammer Mill (HM)

Hammer Mill (HM)
The mill is provided with swing hammer or chip hammer. A primary/secondary crushing for milling large raw material with maximum of 70-80mm.

Goblin (GOB)

Goblin (GOB)
By using liquid nitrogen, Goblin freezes and pulverizes materials, which are difficult to pulverize at normal temperature. Because of the low temperature process, it is suitable for foods and spices that require maintaining flavor.

Baryonyx (BRX)

Rotor and stator perform continuous cutting and crushing of the material, as if cutting with scissors. Suitable for processing fibrous, sheet-like, and elastic materials.

PRIODON (PRD)

It is a mill with high-speed rotation of sharp saw blades, applying potent shear force. Size of the milled product can be controlled with roster or screen attached to the discharge part.

Polvo Gene (PG)

It is a new type mill with a built in classifier. Milling of food or chemicals with low heat resistance can be milled. Disassembling, cleaning, and maintenance of the powder contact parts are easy and it corresponds to the GMP specification.